SOFAR 7K~10.5KTLM-G3
User manual
Copyright © Shenzhen SOFAR SOLAR Co., Ltd
- 1 -
1. Basic safety information
If you have any question or problem when you read the following
information, please contact Shenzhen SOFARSOLAR Co., Ltd.
Note
1.1. Safety instructions
Read and understand the instructions of this manual, and be familiar with
relevant safety symbols in this chapter, then start to install and troubleshoot the
equipment. According to the national and state requirements, before connecting
to the electrical grid, you must get permission from the local electrical grid
operation can only be performed by qualified electrical engineer. Please contact
the nearest authorized service center if any maintenance or repair is needed.
Contact your distributor for the information of the nearest authorized service
center. Do NOT repair it by yourself, it may cause injury or property damage.
Before installing and maintaining the equipment, you should turn the DC switch
OFF to cut off the high voltage DC of the PV array. You can also turn the switch
in the PV combiner box OFF to cut off the high voltage DC. Otherwise, serious
injury may be caused.
Qualified persons
The customer must make sure the operator has the necessary skill and training to
do his/her job. Staff in charge of using and maintaining the equipment must be
skilled, aware and mature for the described tasks and must have the reliability to
correctly interpret what is described in the manual. For safety reason only a
qualified electrician, who has received training and / or has demonstrated skills
and knowledge in construction and in operation of this unit, can install this
inverter. Shenzhen SOFARSOLAR Co., Ltd does not take any responsibility for