Soehnle Professional 3035 страница 72 Скачать руководство пользователя

Страница: 72 / 124

6.5.9 Intermediate tare

Unknown tare values are added to the existing tare memory, the net value remains unchanged.

Press the F3 Zw Tara key in Tare functions level. Put on the additional tare weight. Confirm with F6 Accept.

The additional tare weight was stored in the tare memory, the net value remains unchanged.

Repeat the procedure for further additional tare.

The weight is displayed with the note Net. When the scale is unloaded, the tare weight is displayed with a

negative sign.

Delete the tare by overwriting it with a new tare or by pressing the or key .

To display the tare memory, press the key , then the key .

Here you can delete the tare memory with F2 Delete, F5 Cancel ends the display of the tare memory without

making any changes. If you want to change the value in the tare memory, you can enter a new value with the

numeric keypad and enter it in the tare memory with F6 as a manual tare entry.

6.5.10 Automatic tare

Automatically tares the first weight value on the scale.

Activate the Autotare function for the desired measuring point in the setting mode under Scale

/ Scale parameters / Autotare with the setting on.

Place an empty container on the empty scale.

At stability, the first weight value is stored in the tare memory and subtracted from the weight display. The

weight is displayed with the message Net.

During automatic taring, the message "Autotare active" is displayed. When the scale is unloaded, the tare

memory is automatically cleared and the message "Autotare active" is displayed. The scale returns to the

gross display.

You can clear Auto-Tare with a loaded scale by pressing the or key.

The Auto-Tare function is activated automatically when the scale is unloaded and again loaded.

To display the tare memory, press the key , then the key.

Here you can delete the tare memory with F2 Clear, F5 Cancel ends the display of the tare memory without

making any changes. If you want to change the value in the tare memory, you can enter a new value with the

numeric keypad and enter it in the tare memory with F6 as a manual tare entry.

Combinations of auto tare with other tare functions:

Multiplicative tare

The large container placed on the scale first is tared by auto-tare. Identical sub-packages placed on

the scale are then tared by multi-tare.

Additive tareThe

first large container placed on the scale is tared by auto tare. Different sub-packages with known tare

are then placed on the scale and tared by manual add-tare.

Intermediate tare

The large container placed on the scale first is tared by auto-tare. Different sub-packages with

unknown tare are then placed on the scale and are tared by intermediate tare.

Содержание 3035





























































































































Результаты поиска

Содержание 3035

Отзывы:

Похожие инструкции для 3035

Бренды по названию

Популярные бренды

Soehnle Professional 3035, Руководство пользователя

Результаты поиска

Содержание 3035

Отзывы:

Похожие инструкции для 3035

Бренды по названию

Популярные бренды