socomec ISOM Digiware, Инструкция по эксплуатации

Страница: 47 / 84

47 EN
ISOM DIGIWARE - 546780C - SOCOMEC
7. DIGIWARE BUS
7.1. Principle
Display
ISOM Digiware D Option for PMD:
Measuring module U
DIRIS Digiware U-xx Module IMD
ISOM Digiware L-60 Module FLD
ISOM Digiware F-60
Terminals DI-
RIS Digiware
ISOM Digiware is a system which must comprise the following elements:
• A remote display ISOM Digiware D-x5
• An ISOM Digiware L-60 IMD module
•
A Digiware bus terminal resistor (ref. 4829 0180). This is supplied with the ISOM Digiware D display.
It can also be linked to:
• One or multiple ISOM Digiware F-60 FLD measuring modules for locating insulation faults when live.
• One or multiple adapter modules for ISOM T-15 locating core balance transformers.
• A U measuring module to make use of the PMD functionality.
When a DIRIS Digiware U-xx module is added to the system, always make sure you adjust the communication
baudrate of the Digiware bus to 115200 bauds in the Easy Config software from the DIRIS Digiware U-xx module.
7 .1 .1 . Digiware bus connection cable
Length (m) Quantity Reference
0.06 1 4829 0189
0.1 1 4829 0181
0.2 1 4829 0188
0.5 1 4829 0182
1 1 4829 0183
2 1 4829 0184
5 1
4829 0186
10 1
4829 0187
50 m reel + 100 connectors
4829 0185
Use the shortest possible length of cable to optimise the electromagnetic emissions.
The total max. width must not exceed 100 metres.
Use only SOCOMEC cables for the Digiware bus.