5
EN
ISOM DIGIWARE - 546780C - SOCOMEC
2. HAZARDS AND WARNINGS
The term "unit" used in the following paragraphs encompasses ISOM and DIRIS Digiware and its associated current
sensors (ΔIP, TE, TR or TF).
The assembly, use, servicing (including cleaning) and maintenance of this equipment must only be carried out by
trained, qualified professionals (in case of failure, please contact our Customer Services).
SOCOMEC shall not be held responsible for failure to comply with the instructions in this manual.
2.1. Risk of electrocution, burns or explosion
Caution: risk of electric shock
Ref. ISO 7000-0434B (2004-01)
Caution: refer to the accompanying documentation each time this
symbol is shown
Ref.
ISO 7010-W001 (2011-05)
•
This device must only be installed and serviced (cleaning with a dry cloth) by qualified personnel who have in-
depth knowledge of installing, commissioning and operating the device and who have had appropriate training.
He or she should have read and understood the various safety measures and warnings stated in the instructions.
•
Be aware of protection devices (insulation monitoring system), annual preventive maintenance should be carried
out to test the system's basic functions. (Manual activation of the test function)
• Use connection cables compatible with the voltage and connection terminals of the devices.
•
If, for usage reasons, the device is connected by terminals L1, L2 to a powered IT network, terminals KE and FE
should not be separated from the protective conductor (PE).
•
Prior to any work on or in the unit, disconnect all power sources (voltage inputs, the unit's auxiliary power supply
and dry contact supplies).
• The isolation options must be:
- within the electrical installation itself
- located somewhere convenient and easily accessible
- labelled as the unit's power switching device
•
Always use an appropriate voltage detection device to confirm the absence of voltage.
•
Replace all devices, doors and covers before turning on power to this equipment.
• Always power the device with the correct rated voltage.
• Install the unit following the recommended installation instructions and in a suitable electrical cabinet.
• These devices are designed to be integrated; they must be installed in an additional enclosure providing
protection against electric shocks and fire.
•
Always connect ΔIP, TE, TR or TF current sensors using the recommended connection cables and observing the
maximum prescribed currents.
•
For safety reasons, only use accessories that conform to the manufacturer's specifications.
•
During installation, the safety of any system integrating the device is the responsibility of the system installer.
Do NOT clamp or pull out NON-INSULATED conductors carrying DANGEROUS VOLTAGE which could
cause an electric shock, burn or arc flash.
Ref. IEC 61010-2-032
Failure to take these precautions could cause death or serious injuries.
If there is a problem, please contact
SOCOMEC,1 rue de Westhouse, 67235 BENFELD, FRANCE
Tel. +33 3 88 57 41 41
[email protected]
Содержание ISOM Digiware
Страница 27: ...27 EN ISOM DIGIWARE 546780C SOCOMEC 5 3 2 DIN rail mounted TE 18 TE 55 TE 90 2 1 Removing clamps or...
Страница 79: ...79 EN ISOM DIGIWARE 546780C SOCOMEC 12 4 ISOM Digiware F 60 response curves...
Страница 80: ...80 EN ISOM DIGIWARE 546780C SOCOMEC...
Страница 83: ...83 EN ISOM DIGIWARE 546780C SOCOMEC...
