Lit. No. 76616, Rev. 02
31
November 15, 2018
DEFAULT CONTROL SETTINGS
Deluxe Control
The values for the deluxe control unit below have been
factory calibrated for the Liqui Maxx™ Sprayer System
and can be changed at any time through typical
control calibration procedures. For more information
on how to calibrate the control, refer to the control's
Owner's Manual.
Factory Settings — Deluxe Control
ENGLISH
Tank Set Point
OFF
Fill Tank Size
OFF
Control Speed
–
1
..
Vehicle Number
1
BLAST Target Rate
35
BLAST Duration
5
Start Time
0 (OFF)
Auto Delay Time
1 sec
Valve Polarity
Bypass
Auto Shut-Off
ON
Minimum Alarm Speed
0 MPH
Manual Control Enable
ON
Alarm Enable
ON
Default Calibration Values
English
Mode
Acres
Speed Cal
0.189
Flow Cal
148
Min Flow
0.0
Target Rate
30.0
Adjust Rate
5.0
Section 1 Width
96.0
Section 2 Width
96.0
Section 3 Width
96.0
OPERATING AND CALIBRATION INSTRUCTIONS
Downward Spray Nozzle Selection
PBA-300-1
Select the nozzles to use by referring to the
application rates charts. Rotate the selection wheels
so that the desired nozzle faces downward.
Nozzle Alignment
For consistent brine application, make sure that the
holes in the nozzles are aligned with the boom.
Align holes
with boom.
