Smoke hollow DG1100S Скачать руководство пользователя страница 25

Страница: 25 / 108

1. Inspect the propane tank valve rubber seal for cracks, wear or deterioration

prior to use. A damaged rubber seal can cause a gas leak, possibly resulting

in an explosion, fire or severe bodily harm. Do not use a propane tank with a

damaged rubber seal.

2. Attach or detach regulator to the LP gas cylinder only when cylinder is sitting

in tank holder.

Check that the cylinder valve is closed by turning the knob clockwise.

4. Check that the grill’s burner control knobs are in the “OFF” positions.

Visually inspect the hose assembly prior to each use for evidence of damage,

excess wear, or deterioration. If found, replace the assembly before using your

grill. Only the manufacturer’s supplied replacement should be used.

Remove the protective plastic cap from the cylinder valve.

Check that the hose does not contain kinks, does not contact sharp edges, and does not contact surfaces that

may become hot during use.

8. Hold regulator and insert the brass nipple into the LP cylinder valve outlet. Ensure that the device is centered properly.

9. Turn the large coupling nut clockwise by hand and tighten to a full stop. Take care not to cross thread the

coupling nut onto the cylinder valve. Do not use tools to tighten connection. Note: If you are unable to make the

connection, repeat Steps 7 and 8.

CONNECTING THE LP GAS CYLINDER TO THE GRILL

●

The LP Gas Cylinder must be a 20 pound cylinder and have a Type 1 Cylinder Valve Outlet

Connector.

●

Handle the Cylinder with care - do not drop it.

●

When you are not using the grill, the LP Gas Cylinder should be dis-

connected.

●

Connect the regulator and hand tighten firmly.

●

Do a leak test each time you connect a LP Gas Cylinder and before

lighting the grill.

●

Never use a match or lit flame to test for leaks.

●

To test, prepare a weak solution of detergent and water. Spray or

swab the solution onto the connection of the regulator to the LP Gas

Cylinder valve, and on all the joints in the hose connections up to the burner valves (which

MUST be closed in the "OFF" position).

●

Open the LP Gas Cylinder valve, and watch for any bubbles to appear at all the connection

points. No bubbles indicate - All Clear!

●

If there are any bubbles, there is a leak which must be fixed.

●

Never obstruct the flow of combustion and ventilation air.

Connecting the LP gas cylinder to the grill

Lighting the grill

●

Always open the Lid before lighting the grill.

●

All burner knobs should be in the "OFF" position.

●

Slowly Open the LP Gas Cylinder valve,1-1 1/2 turns

●

Push the gas knobs in fully, and slowly turn counter-clockwise

(to the left) to the "LIGHT" position.

●

Then press and hold the black button of the igniter, there will be clicking and sparking until

the burner is lit.

●

You can then adjust the knob to your desired setting.

●

If the burner did not light, turn the knob back to the “OFF” position, wait 5 minutes for any gas

to clear away, and then repeat the lighting procedure.

●

For Sear Burner, turn the knob counter-clockwise (to the left) and then PUSH the Black Ig-

niter Button to light the burner. If the burner does not light ,then turn the knob to the “OFF”

position, wait 5 minutes and then try again.

●

After using the grill, turn all burner knobs to the

"HIGH" position and then push fully in and turn to the

"OFF" position.

●

At once turn the valve on the LP Gas Cylinder OFF.

●

IF the igniter does NOT light the burner, you can light it

with a match or a piece of burning paper - hold the match

or paper with the Match Holder attached at the back of the

grill, put it through the openings in the Cooking Grid and

next to the Flame Tent covering the burner. Then follow the lighting procedure above.

●

Observe the proper burner flame - it should be a blue/yellow color about 1/2” long.

Sear Burner Operation

●

ALWAYS be sure to OPEN the Lid before lighting the Sear Burner and leave open during

use. Leave Sear Burner open until it is completely cool.

●

Preheat the Burner for 5 minutes

●

Sear one side of the food, turn the food over and sear the other side. Then continue cooking

each side of the food on the standard burners until done to your satisfaction

OPERATING INSTRUCTIONS

YELLOW

BLUE

Burner

Good Flame

Bad Flame

The cylinder must also be equipped with:

•

A shut-off valve terminating in a Type 1 gas cylinder valve outlet.

•

A Type 1 valve that prevents gas flow until a positive seal is obtained.

• An arrangement for vapor withdrawal.

•

A collar to protect the cylinder shut-off valve.

• A safety relief device having direct communication with the vapor

space of the cylinder.

•

A listed over-filling prevention device (OPD).

BEFORE STORING YOUR GRILL:

• Ensure that the cylinder valve is fully closed.

•

Clean all surfaces. Lightly coat the burners with cooking oil to prevent excess rusting.

• If storing the grill indoors, disconnect the LP tank and leave the LP tank OUTDOORS.

• Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap

on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result

in leakage of propane.

The installation of this appliance must be in accordance with all applicable local codes, or the

National Fuel Gas Code ANSI Z223.1 NFPA 54

When purchasing or exchanging a cylinder for your gas grill, it must be:

Constructed and marked in accordance with the specifications for LP gas cylinders of the U.S. Department

of Transportation (DOT), and

Provided with a listed over-filling prevention device (OPD), and

3. Provided with a cylinder connection device compatible with the connection for outdoor cooking appliance.

Check that the cylinder valve is closed by turning the knob clockwise.

2. Place the cylinder into the tank support bracket on the bottom of the left brace. Then place tank retainer

wire over cylinder making sure the tank is secure.

3. Orient the cylinder such that the valve opening faces left side of grill and so that the hose is not kinked or damaged.

Make sure tank sits securely in tank support bracket.

LP GAS CYLINDER (TANK) SPECIFICATIONS:

INSTALLING THE LP GAS CYLINDER (TANK) ON TO THE GRILL:

1/4"-20 *15MM 1 PC

OPERATING INSTRUCTIONS

Содержание DG1100S













































































































Результаты поиска

Содержание DG1100S

Отзывы:

Похожие инструкции для DG1100S

Бренды по названию

Популярные бренды

Smoke hollow DG1100S, Руководство пользователя

Результаты поиска

Содержание DG1100S

Отзывы:

Похожие инструкции для DG1100S

Бренды по названию

Популярные бренды