17
STEP 23:
Attach control panel assembly to cabinet
by carefully angling and feeding the sear
burner valve through the openings
in the front face of the grill and then
out the hole in the side of the grill
(Fig.A), (Fig.B) and (Fig.C).
Allow it to hang free for now.
Carefully push each ignition wire
through the holes to be attached
to the burner tubes later. Check that
no wires have disconnected
from igniter housing (Fig. D).
Attach the control panel with the
(4) screws from inside the grill.
1/4 *15 4 PCS
预装。客户松开，
再拧紧
31
Hardware Needed:
(4) 1/4-20x5/8” Screws
1/4-20 *
5/8"
6 PCS
STEP 24:
From inside of the cabinet,
attach sear burner housing
and lid assembly to cabinet
with (6) screws.
18
Hardware Needed:
(6) 1/4-20x5/8” Screws
Fig. C
Fig. D
ASSEMBLY,
ENSAMBLAJE
23
24
Fig. A
Fig. B
