manualshive.com logo in svg

Smiths Kelvin Hughes Nucleus 3 5000 Series, Системный справочник

Поделиться
Скачать
Smiths Kelvin Hughes Nucleus 3 5000 Series Скачать руководство пользователя страница 55

136

To adjust the angle of the parallel index line:

(1) Position the cursor over the PI line and press the

middle pushbutton to select it.

(2) Press and hold the left pushbutton while moving

the  trackerball through the north/south axis to
adjust the PI line angle.  The PI line is
automatically deselected as soon as the left
pushbutton is released.

END Box – Exit the NAV Menu 

137

To exit the NAV menu, with the END box highlighted,
press any pushbutton.

PLOT Box – Short cut to PLOT Menu 

138

To open the PLOT menu, with the PLOT box
highlighted, press any pushbutton. The PLOT menus

are then displayed, as shown below. 

139

AIS functionality is available on ARPA and ATA
systems. To open the AIS menu, with the AIS box

highlighted, press right pushbutton. The AIS menu is then
displayed. The AIS menu provides facilities to select any AIS
mode, whether it is OFF, AISc, or AIS.

OFF - No AIS processing done, no AIS plot displayed.

AISc - AIS plots which have CPA and TCPA both within
the limit displayed (i.e. dangerous plots).

AIS - All available AIS plots are displayed.

140

When AIS plots are being displayed, a white dotted
circle indicates the range of the AIS plot furthest from

ownship. If only the ownship plot is being displayed, the circle 
will have zero radius, and will not be visible; if the plot being
processed is at a range that exceeds the PPI, then the circle
will only appear when the PPI range is increased to more
than the range of the AIS plot that is furthest away.

141

The quantity of AIS plots processed can be from 00 to
50, controlled by adjusting with a left click on the AIS

box. Each AIS plot being processed will be displayed
depending on PPI image, and AIS mode. If the plot's range is
near enough to be displayed then a dangerous plot will
always be displayed; if in AISc mode then non-dangerous
plots will not be displayed, in AIS mode any plot is displayed.

VDU Box – Short cut  to  VDU Menu 

142

To  open the VDU menu, with the VDU box highlighted,
press any pushbutton and the following menu appears.

PLOT MENU

 

143

The contents of the plot menu are dependent on the
radar plotting aid fitted and are described in chapter 2.

AIS MENU

144

The contents of the AIS menu are described in Chapter 
2.

Amdt. 5

1.19

July 03

KH 2020

Chap 1

CD-4767

CD-4771

CD-6028

Содержание Kelvin Hughes Nucleus 3 5000 Series































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды