Smiths Kelvin Hughes Nucleus 3 5000 Series, Системный справочник

Страница: 38 / 510

Pushbuttons
14 Pushbuttons are used to activate/select a particular
function. On-screen guidance as to which button to
press is given in the Information Boxes located in the lower
centre portion of the display. The information boxes, when
first displayed, after going to ‘Run’ from standby, show:
15
When a function is selected (e.g. Range/Rings) the
Information box displays similar data to that in the
pop-down (information) boxes which appear below the
selected function box. If all pushbutton activities are the
same, a red box appears on the display containing the
legend:
16
A facility which has been previously activated, such as
EBL, is re-selected by positioning the cursor in close
proximity to the required facility and pressing the centre
pushbutton.
NU CLEUS 7000 DIS PLAYS
17
Refer to Chapter 8c for Operating Information
concerning the Flat Panel Displays.
Power ON/OFF
CAUTION
Before switching on, make sure that the radar
scanner is clear and that no maintenance work is
being implemented.
Nu cleus 5000/6000 Dis plays
18
The 5000/6000 display is switched on using the
ON/OFF switch, which is located on the left-hand side
of the Screen Control Unit (SCU). Two short beeps sound, to
indicate that all systems are functioning correctly. After a few
seconds, the standby screen is displayed.
Nu cleus 7000 Dis plays
19 The 7000 display is switched on using the RADAR
ON/OFF switch, which is located on the front of the
On/Off Sounder unit. (Refer to Chapter 8c for information on
the On/Off Sounder Unit). The Power Indicator illuminates to
indicate that power is present at the display and two short
beeps sound, at the On/Off Sounder unit, to indicate that all
systems are functioning correctly. After a few seconds, the
standby screen is displayed.
Screen Il lu mi na tion
20 The adjustment of Day/Night, brilliance and contrast
levels and Audible (AUD) alarm on/off are available
upon selection of the VDU box, displayed in the bottom
right-hand of the screen.
21 At any time, pressing all 3 pushbuttons (on the SCU
for 5000/6000 displays or on the Remote Trackerball
for 7000 displays) simultaneously increases the VDU
brilliance and contrast.
De gauss
22 Colour tones on raster type displays may be adversely
affected by changing magnetic fields. If the colour is
degrading, press the DEGAUSS pushbutton, located on the
right-hand side of the SCU (5000/6000 displays), to restore
the display to normal.
May 01 1.2 Original
KH 2020
Chap 1
ACQ ERBL Select
CD-2469
USE ANY KEY
CD-1964