Smiths Kelvin Hughes Nucleus 3 5000 Series, Системный справочник

Страница: 267 / 510

Set ting the For warding Dis tance
64 To set the Forwarding Distance:
(1) Position the cursor in the first of the boxes
(2) Press any of the control buttons and whilst
maintaining pressure on the button rotate the
trackerball until the required distance is set in
the box.
65 The graph that results from the input of the above
information is self scaling. Data is Saved on Exit from
the EBL setup screen.
Rate of Turn Curved EBL
66 To input the parameters for the Rate of Turn Curved
EBL, follow the setting-up procedure as above but
input Rate of Turn data (degrees/minute) instead of Radius
of Turn data (nautical miles radius).
WARNING SET UP SCREEN
67 Allows the operator to change the alarm type of
messages displayed. The options are as follows:
(1) OFF - do not display this warning (not available
for all warnings).
(2) TIMEOUT - 4 to 6 seconds display of the
warning.
(3) CONFIRM - Operator acknowledgeable warning
remains displayed until acknowledged.
(4) USE DEFAULTS - Sets all to Confirm.
NOTES:
(1) Ensure that switch SW1 on the System PCB is switched
ON before any changes.
(2) Switch SW1 to OFF, on the System PCB, or switch SW1
off, before leaving Menu.
July 03 5.10 Amdt. 5
KH 2020
Chap 5
CD-4809
CD-4810