Smiths Kelvin Hughes Nucleus 3 5000 Series, Системный справочник

Страница: 459 / 510

KH 2020
Chap 8c
Original 8c.7/8 May 01
At Relative Humidity 0% : -15 C to +55 C ° °
At Relative Humidity 95% : +40 C °
OPERATING TEMPERATURE RANGE
Weight: 10kg
At Relative Humidity 0% : -15 C to +55 C ° °
At Relative Humidity 95% : +40 C °
OPERATING TEMPERATURE RANGE
530
ref
570
280 ref
420 230
CABLE ACCESS
TO INSTALL THE NUCLEUS 7000
SPLIT PROCESSOR & FLAT PANEL DISPLAY
NOTE:
1.
2.
3.
4.
5.
A) DISPLAY UNIT
B) PROCESSOR UNIT
A 2m Cable Kit is supplied as standard with optional 5, 10, 15 & 20m kits also available.
Mark out the position of the Processor Unit, leaving sufficient clearance for ventilation,
cable access and servicing; drill the bolt positions as shown in the diagram.
Secure the Processor Unit in position.
Feed the ship's cables through the base of the unit and make the connections as detailed
on the appropriate Connections Diagram(s).
Ensure that the Processor Unit is directly earthed to the ship's earth, using the bolt provided.
See Monitor to Processor Connections Diagram
OPERATING TEMPERATURE RANGE
POWER CONSUMPTION: 380VA
COMPASS SAFE DISTANCES
PROCESSOR UNIT:
FLAT PANEL DISPLAY:
13kg
10.2kg
AT RELATIVE HUMIDITY 0%: -15 C TO +55 C
AT RELATIVE HUMIDITY 95%: +40 C
° °
°
DISPLAY
0.7m
2.0m
0.4m
0.8m
GRADE 1
1/4 °
GRADE 2
1 °
PROCESSOR
CD-4333
MENU
DOWN
UP
37.59
3.05
77.47
358.90 (ACTIVE AREA)
399.5
324
61.47
7.87
482
466
287.02
45.72
449.3
12.70
USER CONTROLS BEHIND ROTATING PANEL
FLAT PANEL DISPLAY NNR-A70 (18-INCH)
POWER CABLE (3 CORE)
NOTE:
NNR-A988, NNR-A989 AND NNR-A992 ARE ALL PART OF NNR-A991 CABLE KIT, FOR USE WITH FLAT PANEL MONITOR NNR-A70.
NNR-A530 IS INCLUDED WITH NNR-A10-3.
L
N
E
SUPPLY IN/OUT
1
2
VIDEO INPUT PCB (NNR-A215-1)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
GND
ON/OFF SW
SIGNAL
GND
SYNC
SETTINGS
RED
GREEN
BLUE
GND
DDC RETURN
GND-R
GND-G
GND-B
RESERVED
GND-SYNC/SELF RASTER
GND
DDR DATA
H-SYNC
V-SYNC
DDC CLOCK
+24V dc
GND
SKA
SKD
1
2
PLC
PLR
INPUT PCB (NNR-A110)
REMOTE ON/OFF SOUNDER (NNR-A65)
FLAT PANEL MONITOR (NNR-A70)
LK1
LK2
V/H
H
OPEN CLOSED
1
2
SVGACABLE
(NNR-A988)
CABLE
(NNR-A987)
CABLE
(NNR-A530)
CABLE
(NNR-A989)
CABLE
(NNR-A992)
OUTPUT
TERMINALS
TB1
1
2
3
4
NUCLEUS 7000 FLAT PANEL DISPLAY
SYSTEM
L
N
E
SUPPLY IN
INPUT
TERMINALS
PLN
2
3
4
5
7
Tx
Rx
DTR
GND
RTS
2
3
4
5
7
PL1 SK1
2
3
4
5
7
RED
BLUE
1
2
REMOTE TRACKERBALL (NNR-A10-3)
TB1 CON 1
5
4
1
2
3
1
2
3
6
4
RED
BLUE
GREEN
BLUE
RED VIDEO
GREEN VIDEO
BLUE VIDEO
GND
NO CONNECTION
GND R
GND G
GND B
NO CONNECTION
GND
GND
SDA
HORIZONTAL SYNC
VERTICAL SYNC
NO CONNECTION
SKJ2
PLJ1
+24V dc
+24V dc
RTN
1.
2.
Refer to the dimensioned drawing opposite for hole locations.
Fit the Display Unit in the required location and fasten in position using the fixings supplied.
Mark out the the cut-out position for the Flat Panel Display in the Panel or
Console (as appropriate), allowing sufficient space for cable access and ventilation.
Cut out the aperture for the Flat Panel Display and drill the required bolt positions for fixings.
NUCLEUS SPLIT PROCESSOR
(NNR-A59) ARPA
(NNR-A60) ATA
(NNR-A-61) EPA
PROCESSOR UNIT (NNR-A59) ARPA
(NNR-A60) ATA
(NNR-A61) EPA
Figure 2c - Nucleus 7000 18-inch Flat Panel Display (NNR-A70): Installation Diagram Figure 2c