Smiths Kelvin Hughes Nucleus 3 5000 Series, Системный справочник

Страница: 407 / 510

IN TER FAC ING FOR THE LOW RA TIO
COM PASS & MAS TER/SLAVE
IN STAL LA TIONS
IN TRO DUC TION
5 The following information provides a guide for the
installation of any of the Nucleus Interface Kits listed
below:
(1) Low Ratio Compas s Kit – HR C-A188 or
HRC-A189
(2) Master/Slave Kit – NNR-A285 (N2 6000) or
NNR-A440 (N2 5000)
(3) Master/Slave Synchro Kit – HRC-A289
(4) Divide By Four PCB – CDY-A55
(5) Interface Box – HRC-A26
Low Ra tio Com pass Kit
6
To fit the Kit follow Paragraph 17, then Paragraph 24
for Nucleus 6000 or Paragraphs 29 and 55 for Nucleus
5000. External connections are described in Paragraphs 34
to 42, complete the installation using Paragraphs 62 and 65.
Mas ter/Slave Kit
7 Implement the instructions in Paragraph 17, as
required. To fit the Kit follow Paragraph 23 then
Paragraph 27 and 28 for Nucleus 6000 or Paragraphs 32
and 33 for Nucleus 5000. External connections are
described in Paragraphs 34 to 42.
8
Implement the Interfacing & Setting up instructions in
Paragraphs 43 to 56. The Master/Slave Interface PCB
Link functions are described in Paragraphs 66 and 67.
Mas ter/Slave Syn chro Kit
9 Implement the instructions in Paragraph 17, as
required. To fit the Kit follow Paragraph 21, then
Paragraph 25 for all Nucleus 5000/6000 displays. External
connections are described in Paragraph 35.
10
Implement the Interfacing instructions in Paragraphs
43 and 57 and Table 10.
Mas ter/Slave Adapter Kit
11 To fit the Kit, implement the instructions in Paragraph
28 for Nucleus 6000 or Paragraph 33 for Nucleus
5000. External connections are described in Paragraphs34
to 42.
NOTE:
Refer to Paragraph 67 for Link 1 setting.
Di vide By Four PCB
12
To fit the PCB implement the instructions in Paragraph
44, then Paragraph 48 for Nucleus 6000 or Paragraph
53 for Nucleus 5000.
In ter face Box
13 For Nucleus 5000 and Split 6000A Systems the
interfaces are mounted in a separate box.
Overall dimensions: 410mm long, 250mm wide, 162mm
high.
All In stal la tions
14
Implement the instructions in Paragraphs 54 and 55
after fitting the Installation Kit.
May 01 8a.4 Original
KH 2020
Chap 8a