Managing Your Security
System
70
RB6741-Z Touchscreen Security System User Manual
5. Tap
Next
to return to the Adjust Camera Video Quality screen.
6. Tap the appropriate video quality based on the measured speed of the Wi-Fi between
the camera and your security network, and then tap
Next
.
Adding Cameras to the Security System
The Touchscreen supports up to six cameras. A camera is added to the security system by
using an Ethernet cable to connect it to the security router. After the camera has been added
to the security system, remove the cable, and place the camera in the desired location. If
your home requires a Wi-Fi repeater, the camera must be connected to the router first, and
then moved to the desired location on the far side of the repeater. For more information
about Wi-Fi repeaters, see Chapter 5.
Note:
The camera images are accessible to the Touchscreen device, the
Subscriber Portal, and mobile apps. The Service Provider does not have access to
these images.
If you need to update the firmware on any camera before adding it to the security
system, you must reset the camera to factory defaults before adding it to the
OpenHome Converge system. This is essential so that it can receive the necessary
changes to communicate with the Touchscreen.
1. From the Settings menu, tap
Home Devices >Cameras > Add a Camera
. The Add
Camera
– Network Test screen appears.
