105
RB6741-Z Touchscreen Security System User Manual
Appendix A -
Installation and Maintenance
Installing the Touchscreen
Note:
The RB6741-Z is not intended to be used as a mobile device. The unit should be
mounted on a desk or wall for proper operation.
To install the Touchscreen:
1.
Remove the Touchscreen from its packaging.
2.
Detach the stand/wall mount by gently
pushing the stand/wall mound bracket into
the Touchscreen and then sliding the
stand/wall mount off in a vertical direction.
Use a P1 Phillips screwdriver to remove
the screw attaching the stand/wall mount
bracket to the Touchscreen if this was
previously screwed in.
3.
Detach the batter cover. A P1 Phillips
screwdriver can be used remove or add a
screw to the battery cover of the
Touchscreen.
The RB6741-Z comes with a battery for
power back up. Locate the Lithium polymer
battery in the packaging of the
Touchscreen.