Installation and Maintenance
106
RB6741-Z Touchscreen Security System User Manual
4.
Align and connect the battery’s pins to the
battery connector so that the wire order is
(left-to-right) black, yellow, and red. Then
place the Touchscreen battery into the
carrier of the Touchscreen.
5.
Snap the battery cover back into place.
Add one screw.
6.
Connect the A/C adapter cable to the
round D/C input port on the back of the
Touchscreen.
7.
Re-attach the wall mount bracket/stand to the Touchscreen and fasten the screw in.
8.
Position the Touchscreen near an un-switched wall outlet (not controlled by a light switch).
9.
If the installation plan requires a wired network connection, connect an Ethernet cable
between the LAN ports of the Touchscreen of the router/gateway. The Touchscreen LAN
port is located next to the D/C input port of the Touchscreen. (See step 6 above)