Managing Your Security
System
45
RB6741-Z Touchscreen Security System User Manual
After the Alarm Transmission Delay period, you still have 5 minutes to disarm the system. If
you do this and a monitoring operator has not contacted you yet, central monitoring is
notified that you have canceled the alarm.
When the Alarm Transmission delay period ends, monitoring operator will attempt to contact
the persons on your Emergency Dispatch list in the order you have determined. This list is
maintained in the Subscriber Portal. The monitoring operator will ask for the secret word to
ensure the person is a valid Emergency Dispatch contact.
Depending on the procedures determined by your service provider, the monitoring operator
might attempt to contact you through the Touchscreen device itself. In this case, there will be
a series of ring tones, and then you will hear the voice of a monitoring operator through the
Touchscreen device. A dialog alerts you that an open call is active on your Touchscreen.
To disarm the system from the Touchscreen, see the procedure below
.
To disarm the system with a key pad device, see
“Disarming the System” on page 113.
To disarm the system from the Touchscreen:
1. Tap the Security Status header when it is in Armed state.
The Security app appears, with a keypad and the
Disarm System
tab active. If the
sensor that was tripped is associated with a camera, the view from that camera appears.
If the sensor is not associated with a camera, the view from the default camera appears.
