SMC Networks IDF60-20-C, Руководство по эксплуатации

Страница: 18 / 54

IDX-OM-V022
Chapter 3 Transportation/Installation
3.2 Installation IDF60/70/80/90 Series
3-4
3.2.4 Auto Drain tube
- A tube (12mm) O.D. is attached as the auto drain. The end of the tube is open to atmosphere to let
drain flow through the tube into a collector or drain pipe.
(When the drain tube to be changed by customer, the tube length should be 5m or shorter and the I.D.
8mm or larger for proper working of auto drain.)
- The compressed air is used to push out the drain periodically. Fix the outlet end of the tube in order to
prevent whipping action during discharge.
- Install the drain tube in such a way so that no drain is trapped.
- During installation, make sure the dryer does not sit on the drain tube which is at the bottom of the unit.
Be careful to avoid the dryer from crushing the tube during installation.
- In case the drain tube to be arranged behind the dryer, please use the attached holder.
- To handle drain discharge, follow the safety guidelines such as wearing protective
goggles, apron, and gloves.
- In cases where oil is mixed in the wastewater discharged from the auto drain, the
liquid would be considered as toxic waste and treatment is necessary in
accordance with local regulations.
WARNING
Holder
Drain tube
Open
O Ｓ
- Keep the ball valve
“OPEN” during in operation. If the ball valve is closed, drain
cannot be discharged.
- Keep the drain cock
“S” side. If the drain cock is “O” side, compressed air is blown
out continuously.
CAUTION