SMC Networks IDF60-20-C, Руководство по эксплуатации

Страница: 27 / 54

IDX-OM-V022
Chapter 5 Maintenance
IDF60/70 /80/90Series A 5.2 Periodical Maintenance
5-3
7) Pull down the lock button of the bowl assembly with your thumb, and rotate the bowl assembly
anticlockwise by 30 degrees to align the marks.
8) Remove the bowl assembly by pulling down on it.
(2)
Mounting of the bowl assembly
1) Check that there are no scratches, twisting or adhesion of foreign matter on the bowl ring, then
thinly apply grease and mount it to the groove of the bowl assembly.
2) Return the cleaned element to the bowl assembly.
3) Mount the bowl assembly to the body of the auto drain. Rotate it until the lock button stops
completely with a click.
（
Rotate the bowl assembly in the left and right direction lightly to ensure
that it will not rotate. If it rotates, re-do this step.)
4) Rotate the drain cock to the "S" side and mount a clip.
(Check that the drain cock will not rotate to the "O" side.)
5) Mount the drain tube as it was.
6) Open the ball valve.
Auto drain maintenance parts
Parts No. Description Qty.
AD52-A Bowl assembly 1
KA00463 Bowl O-ring 1
AD402P-040S Element 1
Bowl assembly
Lock button
Pull down after aligning
the marks.
Mark
Mark
Bowl assembly
Bowl O-ring
Element