SMC Networks IDF60-20-C, Руководство по эксплуатации

Страница: 34 / 54

IDX-OM-V022
Chapter 7 References
7.2 Refrigerant with GWP reference IDF60/70/80/90 Series
7-2
Note 6: Products other than Option R are not equipped with an earth leakage breaker. Purchase
an appropriate earth leakage breaker separately. Use an earth leakage breaker with a leak
current sensitivity of 30mA.
Note 7: This value specified by IPCC4 AR4. The value specified by the Revised Fluorocarbons
Recovery and Destruction Law (Japanese law) is R410A GWP: 2090.
Note 8: The maximum operating pressure is 1.0MPa as standard, but it is possible to achieve
1.6MPa when selecting Option L or Option V.
Correction factor
Inlet air temperature
o
C
5~30 35 40 45 50 55 60 65
IDF60/IDF70 1.26 1.00 0.78 0.64 0.54 0.42 0.35 0.27
IDF80/IDF90 1.59 1.29 1.00 0.81 0.63 0.55 0.47 0.39
Inlet air pressure MPa
0.2~0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0~1.6
IDF60/IDF70 0.70 0.74 0.87 0.92 1.00 1.02 1.05 1.05
IDF80/IDF90 0.64 0.75 0.86 0.93 1.00 1.04 1.07 1.09
Ambient temperature
o
C
20 25 30 32 35 40 45
IDF60/IDF70 1.12 1.07 1.05 1.00 0.94 0.83 0.71
IDF80/IDF90 1.11 1.11 1.04 1.00 0.92 0.80 0.64
Outlet air pressure dew point
o
C
3 5 10 15
IDF60 0.50 0.64 1.00 1.32
IDF70 0.29 0.49 1.00 1.45
IDF80 0.57 0.69 1.00 1.30
IDF90 0.44 0.60 1.00 1.38
Calculation example: The air flow capacity when the dew point of the IDF60 is set to 10
o
C under
the following conditions is calculated. [Operating conditions: Inlet air temperature: 35
o
C, Ambient
temperature: 35
o
C, Inlet air pressure: 0.6MPa, Power supply frequency: 50Hz]
5.3 m3/min(ANR) ×1.00 × 0.94 × 0.92
＝
4.6 m3/min(ANR)
7.2 Refrigerant with GWP reference
Refrigerant
Global Warming Potential (GWP)
Regulation (EU) No 517/2014
(Based on the IPCC AR4)
Revised Fluorocarbons Recovery
and Destruction Law
(Japanese law)
R410A 2,088 2,090
Note 1: This product is hermetically sealed and contains fluorinated greenhouse gases.
Note 2: See specification table for refrigerant used in the product.