SMC Networks HRS090-A, Руководство по эксплуатации

Страница: 100 / 196

HRX-OM-S004
Chapter 5 Display and setting of various functions
5.14
Pressure unit Change HRS Series
5-34
5.14 Pressure unit Change
5.14.1 Pressure unit change
Pressure unit used for the thermo-chiller can be selected MPa or PSI. This
setting determines the pressure unit which is displayed/output. The default
setting is MPa.
5.14.2 Setting/checking of pressure unit change
The table below shows the set item for the pressure unit change and the
default setting.
Table 5.14-1 Set item for pressure unit change
Display Item Contents Default setting
Pressure unit Sets pressure unit. MPa
1.
Press and hold the [MENU] key for approximately 2 seconds.
Repeat pressing the key until the key-lock setting screen [ ] appears on the digital
display.
PV
SV
PV
SV
PV
SV
Setting/Checking: Pressure unit
2.
Press the [SEL] key 12 times.
Setting screen of temperature unit appears on the digital display.
PV
SV
3.
Select a pressure unit with [ ▲ ] key or [ ▼ ] key, and press [SEL] button to enter.
Table 5.14-2 Setting for pressure unit
Set value Explanation Default
Sets the pressure unit to MPa.
✓
Sets the pressure unit to PSI.
4.
Press the [MENU] key once.
Returns to the main display (which shows the circulating fluid temperature).
PV
SV
Press and
hold [MENU]
key.
Press and
hold [MENU]
key.