SMC Networks HRR012-A*-20 Series, Руководство по эксплуатации

Страница: 74 / 160

HRX-OM-W002-A
Chapter 5 Display and Setting of Various Functions
5.5 Advanced setting mode HRR Series
5-26
13.
Press the [
▼] key. Display as shown below. It is not used with this product
14.
Press the [
▼] key. Display as shown below. It is not used with this product
15.
Press the [
▼] key. Display as shown below. It is not used with this product
TEMP READY bandwidth upper limit
16.
Press the [
▼] key. Displays TEMP READY bandwidth upper limit setting screen.

Signal for completion of preparation (TEMP READY)
This function sets the band width for the circulating fluid set temperature (upper/lower
temperature range) in order to notify the customer by communication that the circulating
fluid temperature has reached the band range (upper/lower temperature range).
Alarms can also be assigned.Similar functions include TEMP OUT signal and NOT
TEMP READY signal. Here is an example showing these relationships.
【
TEMP READY function setting example
】
[1]
Circulating fluid temperature at start of operation: about 20 ° C
[2]
Circulating fluid setting temperature: 15 ° C
[3]
"TEMP READY Bandwidth (Upper Limit)": Set to "2.0 ° C".
[4]
"TEMP READY Bandwidth (Lower Limit)": Set to "-2.0 ° C".
[5] "TEMP READY stabilization time": set to "60 sec".
[6] "TEMP READY monitoring start time": set to "30 sec".
[7] "Time when TEMP READY goes off": Set to "10 sec".
[8]
"Switch TEMP READY alarm": Set to "WRN".
[9]
"TEMP READY alarm output": set to "ON".
[10]
"Temperature range upper limit alarm switching": set to "OFF"
.
RUN
Unused
RUN
℃
EXT ⇒ HITMP ⇒ LIMIT
(
Alternately displayed
)
RUN
℃
EXT ⇒ LOTMP ⇒ LIMIT
( Alternately displayed )
Unused
EXT ⇒ TIME
(
Alternately displayed
)
RUN
℃
READY ⇒ HBAND
( Alternately displayed )
READY bandwidth upper limit ( setting range
：
0.1 to 9.9 °C )