SMC Networks HRGC001-A Series Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 102

SMC Networks HRGC001-A Series Скачать руководство пользователя страница 9

HRX-MM-L012

Chapter 1 Safety Instructions

HRGC Series

1.3.Hazards

1-3

1.3.3

Types of hazard labels

The unit has various potential hazards and they are marked with warning
labels. Be sure the read this section before starting any work on the unit.

Warning related to electricity

Warning related to high temperatures

Warning related to rotating objects

Warning related to other general dangers

This symbol stands for a possible risk of electric shock.

The unit is operated at high voltage and contains uncovered live
terminals inside.

z

DO NOT operate the unit without cover panels fitted

z

DO NOT work inside this unit unless you have been trained to do so.

This symbol stands for a possible risk of cutting fingers or hand, or
entanglement by rotating fan.

The unit has a cooling fan that rotates during operation of the unit. The
fan can start and stop intermittantly and without warning.

z

DO NOT operate the unit without cover panels fitted.

This symbol stands for a possible risk of burn or hot surface.

The unit has surfaces that can reach high temperatures during
operation. Even after the power is turned off, there can still be residual
heat in the unit.

z

DO NOT operate the unit without cover panels fitted.

z

DO NOT start working inside the unit until the temperature has
decreased sufficiently.

This symbol stands for general danger.

On the unit this symbol has different meanings.

1. Hazards Inside

Hot Surfaces Inside – See Hot Surface symbol
Rotating Fan Inside – See Rotating Fan symbol
Pressurized Sytem Inside – The unit contains pressurised fluid
systems.

z

DO NOT operate the unit without cover panels fitted.

2. Lifting Hazard

Lifting the unit from eyebolts can be dangerous

z

DO NOT lift the unit without having read the manual.

(only for HRGC005-

∗

)

«
...
7
8
9
10
11
...
»

Содержание HRGC001-A Series







































































































Отзывы:

Нет отзывов