SMC Networks HRGC001-A Series, Руководство по обслуживанию, Страница: 49 / 102

HRX-MM-L012
Chapter 4 Service Procedure
HRGC Series 4.3 Replacement procedure
4-21
„
Mounting
1.
Connect the spiral tube (2pcs).
2.
Apply Loctite to the fan fixing bolt and fix the fan to the motor with it. (Fan fixing bolt x 1)
[Key point]
The fan fixing bolt gets in the slit of the shaft.
3.
Mount the fan motor to the bracket. (Motor mounting screw x 4)
4.
Mount the start-up capacitor. (Screw x 1)
5.
Mount the bracket. (Fixing bolt x 4)
6.
Mount the connector [FAN1] of the fan motor.
7.
Put wires into the locking wire saddles (4pcs).
8.
Connect the ground wire. (Screw x 1)
9.
Fix wires with the tie wrap (2pcs).
10.
Put the wires of the solenoid valve (yellow) into the locking wire saddle s (2pcs) and
close the saddle.
11.
Fix the charge port with the tie wrap (1pcs).
„ Check
When the fan motor is replaced, rotate the fan by hand and check that it turns with no
interference.