SMC Networks HRGC001-A Series, Руководство по обслуживанию, Страница: 37 / 102

HRX-MM-L012
Chapter 4 Service Procedure
HRGC Series 4.3 Replacement procedure
4-9
„ Mounting
1.
Apply the liquid gasket to the threads of the temperature sensor and mount the
temperature sensor using a spanner/wrench.
[Key point]
z
Do not apply the liquid gasket to the first thread. Otherwise, the liquid
gasket will spread to the circulating circuit and cause the product to fail.
z
To prevent dust from getting caught in the threads, check there is no dust
stuck to the threads before the screw is mounted.
2.
Mount the connector [CN1] of the temperature sensor.
3.
Put wires into the locking adjuster clamps (2pcs) and close the clamps.
4.
Mount the temperature adjuster (operation display panel). (Fixing screws x 4)
5.
Put wires into the locking adjuster clamps (2pcs) and close the clamps.