- 3 -
No.EX##-OML0007
Safety Instructions
These safety instructions are intended to prevent hazardous situations and/or equipment damage. These
instructions indicate the level of potential hazard by label of "Danger", "Warning" or "Caution", followed by
important safety information which must be carefully followed. To ensure safety of personnel and
equipment the safety instructions in this manual and the product catalogue must be observed, along with
other relevant safety practices.
Caution
:
If instructions are not followed there is a possibility of injury or equipment
damage.
Warning
:
If instructions are not followed there is a possibility of serious injury or loss of
life.
Danger
:
In extreme conditions, there is a possible result of serious injury or loss of life.
Warning
The compatibility of the product is the responsibility of the person who designs the equipment or
decides its specifications.
Since the product specified here is used under various operating conditions, its compatibility with specific
equipment must be decided by the person who designs the equipment or decides its specifications based
on necessary analysis and test results. The expected performance and safety assurance of the
equipment will be the responsibility of the person who has determined its compatibility with the product.
This person should also continuously review all specifications of the product referring to its latest
catalogue information, with a view to giving due consideration to any possibility of equipment failure when
configuring the equipment.
Only personnel with appropriate training should operate machinery and equipment.
The product specified here may become unsafe if handled incorrectly. The assembly, operation and
maintenance of machines or equipment including our products must be performed by an operator who is
appropriately trained and experienced.
Do not service or attempt to remove product and machinery/equipment until safety is confirmed.
The inspection and maintenance of machinery/equipment should only be performed after measures to
prevent falling or runaway of the driven objects have been confirmed.
When the product is to be removed, confirm that the safety measures as mentioned above are
implemented and the power from any appropriate source is cut, and read and understand the specific
product precautions of all relevant products carefully.
Before machinery/equipment is restarted, take measures to prevent unexpected operation and
malfunction.
Contact SMC beforehand and take special consideration of safety measures if the product is to be
used in any of the following conditions.
Conditions and environments outside of the given specifications, or use outdoors or in a place exposed
to direct sunlight.
Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,
vehicles, military, medical treatment, combustion and recreation, or equipment in contact with food and
beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or
other applications unsuitable for the standard specifications described in the product catalogue.
An application, which could have negative effects on people, property, or animals requiring special safety
analysis.
Use in an interlock circuit, which requires the provision of double interlock for possible failure by using a
mechanical protective function, and periodical checks to confirm proper operation.
