- 7 -
No.EX##-OML0007
Product Outline
System configuration
The EX600 range of units can be connected to various types of fieldbus to achieve the reduction of I/O
device wiring and the use of a distributed control system. The unit communicates with the fieldbus through
the SI unit. One SI unit can be connected with manifold valves with upto 32 points and I/O units with a
maximum 10 points.
All wiring between devices should use cables with suitable connectors at both ends to ensure the system is
compliant to IP67 protection.
SI unit: Performs fieldbus communication and solenoid valve manifold ON/OFF output.
Digital input unit: For connecting sensors with switch output capability. PNP and NPN types are available.
Digital output unit: For connecting output equipment such as solenoid valves, lamps, buzzers, etc. PNP
and NPN types are available.
Analog input unit: For connecting sensors with analogue output capability.
Endplate: Connected at the D side of the EX600 manifold, incorporating the power supply connection.
Solenoid valve manifold: An assembly of solenoid valves. One connector is used as the electric
connection to all connected valves.
Endplate
SI Unit
Digital Input
Unit
Digital Output
Unit
Analog
Input Unit
Manifold
Valve
U Side
D Side
