SmartSight S1600e, Руководство пользователя

Страница: 47 / 113

User Manual Load Default Configuration
33
Identifying a Unit
To recognize an S1600e among a large set of units, you can
make its system status LED flash red rapidly.
To identify an S1600e unit:
1
From the main menu, choose Advanced, then press
Enter.
2
Enter i to make the LED flash red. Re-enter i to set the
LED to its original state.
3
Enter p until you are in the main menu.
4
Enter q to exit.
Load Default Configuration
The Load Default Configuration command, located in the
main menu, resets all unit parameters to their factory
settings (described in Appendix A, page 59). All user-defined
values will be lost. To reset the parameters to their factory
defaults with a hardware operation instead, see page 19.
Following a reset, you will need to reprogram the S1600e
unit (for instance, its IP address and VSIP port) for proper
operation within its network.
Reboot System
The Reboot System command, located in the main menu,
performs a soft boot on the S1600e. A system reboot clears
all unsaved changes in the CLI and returns to your preset
configuration.