SmartSight S1600e, Руководство пользователя

Страница: 44 / 113

4
‹
Setting Parameters with the CLI S1600e
30
SSL Passkey
To secure a unit with SSL, provided of course it has an SSL
certificate, you need to provide a passkey. This passkey
must be the same for all units and the software tools to
allow proper secure communication between them.
It is recommended to perform this operation in
SConfigurator (version 2.55 or higher for the tool and the
unit). Otherwise, to build a truly secure system, you should
first access the CLI through a physical serial port
connection, not through Telnet, therefore avoiding
eavesdropping on the network.
System Status
The system status information indicates the current values
of internal S1600e parameters, including the unit’s serial
number and firmware version. A transmitter and a receiver
connected together need to be running the same firmware
version.
A value of
03-03
or later in Unit Tested indicates that the
unit has an SSL certificate.