manualshive.com logo in svg

SmartSight S1600e, Руководство пользователя

Поделиться
Скачать
SmartSight S1600e Скачать руководство пользователя страница 103

User Manual

Glossary

89

RS-422   A standard interface approved by the Electronic 

Industries Alliance (EIA) for connecting serial devices, 

designed to replace the older RS-232 standard because it 

supports higher data rates and greater immunity to 

electrical interference. 
RS-485   An Electronics Industry Alliance (EIA) standard for 

multipoint communications. 
S1000 Series   The SmartSight series of secure outdoor 

wireless video systems. The series includes the S1000 unit 

(for the 2.4 GHz frequency band in North America), the 

S1000-CE unit (for the 2.4 GHz frequency band in Europe), 

and the S1005 unit (for the 5 GHz band in North America).
S1000w    The SmartSight outdoor wireless video 

transmitter operating on the 2.4 GHz frequency band. 
S1100w   The SmartSight outdoor wireless video 

transmitter operating on the 5 GHz frequency band. 
S1500e Series   The SmartSight series of Ethernet video 

servers (receiver and transmitter) designed for video 

monitoring and surveillance over IP networks. 
S1600e   The SmartSight high-resolution Ethernet video 

server (receiver and transmitter) providing point-to-point 

analog extension with Web access. 
S3100   The outdoor, wireless, digital SmartSight video 

bridging unit. The S3100 bridge is used to wirelessly link 

S1100w wireless video servers, or S1500e series/S1600e 

video servers in remote locations, to an Ethernet LAN.
SConfigurator   (SmartSight Configurator) A proprietary 

graphical program used to configure and update the 

firmware of video server and outdoor wireless bridge units.
Serial Port   An interface that can be used for serial 

communication, in which only one bit is transmitted at a 

time. A serial port is a general-purpose interface that can be 

used for almost any type of device.
Slave   An S3100 unit controlled by a master unit, typically 

in a repeater application.
SMI   (SmartSight Management Interface) A proprietary 

graphical program used to access the command line 

interface of the S1000 series units and to perform firmware 

updates.
SSID   (Service Set Identifier) A name identifying a pair of 

SmartSight units (transmitter and receiver) working 

together.

Содержание S1600e


















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды