SmartSight S1600e, Руководство пользователя

Страница: 45 / 113

User Manual Network
31
Network
The Network menu allows you to configure several
parameters to ensure the compatibility between the S1600e
and its IP network.
For more information about these settings, contact your
network administrator.
DHCP Configuration
DHCP (dynamic host configuration protocol) allows devices
and computers connected to a network to automatically get
a valid network configuration from a server. For more
information about DHCP, see Appendix C, page 63.
You can set this option only if the S1600e is connected to a
network that uses a DHCP server.
Local IP Address
The IP address is the identifier of the S1600e on the
network. The IP address format is a 32-bit numeric address
written as four numbers separated by periods. Each number
is in the 0-255 range. Each device on a network must have a
unique IP address.
Subnet Mask
The subnet mask is the binary configuration specifying in
which subnet the IP address of the unit belongs. A subnet is
a portion of a network that shares a common address
component. On TCP/IP networks, a subnet is defined as a
group of devices whose IP addresses have the same prefix.
Unless otherwise specified by your network administrator, it
is recommended to use a subnet mask of 255.255.255.0.