HMC6 Power Management Controller User Manual
Page 69 of 87
No.
Name
Description
Remark
43.
Busbar Under Frequency 2
Active when the Busbar under frequency 2 alarm
occurs.
44.
Busbar Under Frequency 3
Active when the Busbar under frequency 3 alarm
occurs.
45.
Busbar Over Voltage 1
Active when the Busbar over voltage 1 alarm occurs.
46.
Busbar Over Voltage 2
Active when the Busbar over voltage 2 alarm occurs.
47.
Busbar Over Voltage 3
Active when the Busbar over voltage 3 alarm occurs.
48.
Busbar Under Voltage 1
Active when the Busbar under voltage 1 alarm occurs.
49.
Busbar Under Voltage 2
Active when the Busbar under voltage 2 alarm occurs.
50.
Busbar Under Voltage 3
Active when the Busbar under voltage 3 alarm occurs.
51.
Over Power 1
Active when controller detects generator over power 1
occurs.
52.
Over Power 2
Active when controller detects generator over power 2
occurs.
53.
Reverse Power 1
Active when controller detects generator have reverse
power 1.
54.
Reverse Power 2
Active when controller detects generator have reverse
power 2.
55.
Over Current 1
Active when generator over current 1 occurs.
56.
Over Current 2
Active when generator over current 2 occurs.
57.
Over Current 3
Active when generator over current 3 occurs.
58.
Over Current 4
Active when generator over current 4 occurs.
59.
Fail to Sync
Active when synchronization failure alarm.
60.
Fail to Close
Active when close failure alarm.
61.
Fail to Open
Active when open failure alarm.
62.
Generator Load
Active when generator takes load while deactivate
when generator off load.
63.
HC 1 ACK Output
Active when the starting power requirement of heavy
consumer 1 is satisfied.
64.
HC 2 ACK Output
Active when the starting power requirement of heavy
consumer 2 is satisfied.
65.
HC 3 ACK Output
Active when the starting power requirement of heavy
consumer 3 is satisfied.
66.
Failure to Start
Active when start failure alarm.
67.
Manual Mode
Active in Manual mode.
68.
Semi-auto Mode
Active in Semi-auto mode.
69.
Auto Mode
Active in Auto mode.
70.
Light Load
Active when light load is output.
71.
NEL 1 Trip
Active when non-essential load 1 trip occurs.
72.
NEL 2 Trip
Active when non-essential load 2 trip occurs.
73.
NEL 3 Trip
Active when non-essential load 3 trip occurs.
74.
Engine Fault
Active when engine fault signal is output.
