Smartgen HMC6, Руководство пользователя

Страница: 66 / 87

HMC6 Power Management Controller User Manual
Page 66 of 87
No. Name Description
Auto
Mode Semi-auto
Mode
Manual
Mode
67
Overload To Ask
4
Overload 4 starts the request input, if meets the
required power, it will send answer signal, if not, the
standby unit will be started to meet the required
power.
68
Overload To
Answer 4 Overload 4 closes and sends the answer signal to
controller to make sure it has taken load.
69~99 Reserved Reserved
11.8 OUTPUT PORT SETTING
Table 28 – Output Ports Settings
No. Items Parameter Range Default Description
Relay Outputs
Output 1
1
Contents Setting Fixed Fixed Speed Raise
2 Active Type (0-1) 0 0: Open 1: Close
Output 2
3
Contents Setting Fixed Fixed Speed Drop
4 Active Type (0-1) 0 0: Open 1: Close
Aux. output 7
5
Contents Setting (0-150) 3 Volt Raise
6 Active Type (0-1) 0
0: Open 1: Close
。
Aux. output 8
7
Contents Setting (0-150) 4 Volt Drop
8 Active Type (0-1) 0 0: Open 1: Close
Output 5
9
Contents Setting Fixed Fixed Engine Start
10 Active Type (0-1) 0 0: Open 1: Close
Output 6
11
Contents Setting Fixed Fixed Engine Stop
12 Active Type (0-1) 0 0: Open 1: Close
Output 7
13
Contents Setting Fixed Fixed Close Gen
14 Active Type (0-1) 0 0: Open 1: Close
Output 8
15
Contents Setting Fixed Fixed Open Gen
16 Active Type (0-1) 0 0: Open 1: Close
Aux. output 9
17
Contents Setting (0-150) 8 Common Alarm
18 Active Type (0-1) 0 0: Open 1: Close
Programmable Output 1