User Manual - twentynine
In each setup, the camera and its heat conductor are exposed to the environment temperature of 22.5
◦
C,
until all match (1). As soon as the camera is powered (2) it starts to heat immediately (3) and reaches its
maximum after around one hour (4). The difference in temperature between the sample setups is significant;
the camera which is not mounted to any heat conductor shows after one hour in an environment with 22.5
◦
C
a device temperature of 50.4
◦
C. With a small aluminum heat conductor the camera temperature drops about
12
◦
C to 15
◦
C, depending on the connection to the heat sink.
20
25
30
35
40
45
50
55
0
500
1000
1500
2000
2500
3000
3500
T
e
m
p
e
ra
tu
re
(in
°C
)
Time (in s)
Heat-Up Graphs (GCC1932C)
Not mounted
Aluminum (loose)
Aluminum (well mounted)
(1)
(2)
(3)
(4)
Figure 4: Example of heating behavior of a camera with different thermal connections
1.8
Ingress Protection Class
The camera housing fulfills the
Ingress Protection Class
of IP40. It is protected against solid objects with a
diameter larger than 1 mm (tools, wires, and small wires) and has no protection against liquids.
12
SMARTEK Vision | User Manual - twentynine | Doc. v1.0.2
