SMAR LD303, Инструкция по эксплуатации и техническому обслуживанию

Страница: 39 / 110

Configuration
3.13
Figure 3.7 – Transducer Offline Configuration Screen
Using the menu Table, the user can configure the points.
The user also can read the configurable table and write a new one. In this case, the table must be
monotonous increasing; otherwise, the points will not be configurable. Please see the following
figure:
Figure 3.8 –Transducer Off Line Configuration – User Table Screen
Allows the reading
of configurable
table.
Enter the
input and
output
values
.
After configuring the points, this
key must be press to verify if the
table is monotonous
increasing.
Go to "Device
Off Line
Configuration
Transducer"
window and
select "user
defined
(table)".