SMAR LD303, Инструкция по эксплуатации и техническому обслуживанию

Страница: 36 / 110

LD303 - Operation and Maintenance Instruction Manual
3.10
Figure 3.3 - Function and Transducers Blocks – Simatic PDM
To make the configuration of Transducer Block, we need to select the menu "Device".
Use this menu:
- To change the device address;
- To make the up/download of parameters;
- To configure the Transducer Blocks, Analog Blocks and Display Block;
- To calibrate the transmitter;
- To make the reset by software, to protect the device against writing and to simulate the value from
transducer block to analog block;
- To save and restore data calibration.
Figure 3.4 – Office Configuration – Transducer
Depending on the
application, select
"Pressure"or
"Flow".
The user can select
the linearization
according to his
application.