FUSELAGE
Make sure you have a good stand for fuselage. You will need to assemble the rest of the Sa-
bre on this stand.
Locate the 4 x M5 bolts and washers for fuselage.
Align fuselage and secure with 4 bolts. Check fit
all around seem for sound joined.
Route 3 servo wires and 2 air lines neatly along
inner skin of rear fuselage.
Install servo male and female plugs for 3 servo wires.
Install 2 x quick disconnects for air line.
For transport the rear section is removable by
unscrewing and unplugging connections.
Turn fuselage upside down
Remove nose door bracket around oleo.
Remove the nose retract unit.
Install JR DS8511 steering
servo. Bolt with 4 x M3 bolts and lock nuts.
Centre servo and install pushrod.
Refit nose retract unit with good screws.
Refit nose door bracket around oleo.
Retract unit and check operation of unit. Close the
door and check clearance all around wheel.
P-18
Assembly & Operation Manual
Photo 41
Photo 42
Photo 43
