Home Automation
By adding the optional Skylink receivers, such as the Light Switch Receiver Model SW-100R,
the control panel can be used to control up to 5 different receivers. There are 3 ways to control
these receivers:
1. Using the keypad on the control panel to operate these receivers manually
2. Calling in away from home using a touch tone phone (Refer to “Remote Operation by
Telephone”)
3. Setting up Event Trigger (Refer to Advanced Programming)
These receivers should be programmed to the control panel as device 1 to 5. Please follow the
programming instruction for additional devices for further information.
Light Switch Receiver Model SW-100R
To turn off a light with the control panel:
1. Press the device number button on the control panel, i.e. pressing 1 will turn off device 1,
pressing 2 will turn off device 2.
2. You will hear “Device X Off”, where X is the device number.
3. You will also see the PROG LED flashes, that indicate the control panel is sending out the
wireless signal to control the specific device.
4. If the receiver receives the signal, the control panel will announce “ Device Off Accepted”.
To turn on a light with the control panel:
1. Press the number below the device number that you would like to turn on, i.e. pressing 6 will
turn on device 1, pressing 7 will turn on device 2.
2. You will hear “Device X On”, where X is the device number.
3. You will also see the PROG LED flashes, that indicate the control panel is sending out the
wireless signal to control the specific device.
4. If the receiver receives the signal, the control panel will announce “Device On Accepted”.
Communication
Remote Operation by Telephone
The control panel can be operated while you are away from home. You can have access to the
control panel with any touch tone phone to perform a variety of operations, listed below.
•
Arm
•
Disarm
•
Lights on / off
•
Garage door open / close
•
System status
•
Disconnect
tion.
2.
uring emergency, you can enter a valid password to have
access to the remote operations.
There are 2 ways you can have access to the remote phone opera
1. You can call the control panel when you are away from home;
When the control panel calls you d
