Installation
Installing the Console
You must first determine where the control panel will be located. Please follow the criteria
below to select the ideal location for the control panel.
-
Place it within few feet of an electrical outlet and phone jack
-
Place it where it is easily accessible by you and other users
-
Place it away from any doors or windows which could be accessed by non-intended
users
-
Place it away from extreme temperature sources such as oven, stove and away from
large metal objects which could affect the wireless performance
After you have selected a location for the control panel, you are now ready to connect all the
necessary wires and ready to power up the unit.
1. Connect the phone line from the telephone jack to the back of the control panel where it
marks “Line”.
2. If you have another telephone that will be using the same telephone jack, you may connect
this telephone to the control panel by plugging in the phone cord to the “Phone” outlet on the
control panel.
3. Remove the battery cover on the bottom of the control panel with a Phillips screwdriver, and
insert 6V backup battery pack. All the LED will flash once, and you will hear 3 beeps. PWR
LED will be on indicating the control panel is powered properly.
4. Plug in the AC adapter to the nearby electrical outlet and plug the other end to the socket on
back of the control panel.
5. Rotate the antenna to the upright position to ensure the best signal reception.
6. To install battery (for US version), pry off the battery cover. Plug the RED battery wire to the
battery terminal (+). Plug the BLACK battery wire to the battery terminal (-). Cover the
battery cover and secure by the screw.
7. To install battery (for EU version), pry off the battery cover. Mate the battery connector from
the battery to the wires from the main unit. Cover the battery cover and secure by the screw.
