Skyjack 6826El, Руководство по эксплуатации

Страница: 19 / 47

SKYJACK, Page 19
April 2006
SJIII Series E - CONVENTIONALS
Component Identification Section 2 - Operation
2.2-10 Operator’s Control Box
Operator’s Control Box - This metal control station is
mounted at the right front of the platform. It contains
the following controls:
Figure 2-8. Operator’s Control Box
1. LIFT/DRIVE/STEER Controller - This one-hand
toggle-type lever controls lift/drive and steer
motions. Internal springs return it to neutral when
stick is released.
2. LIFT/DRIVE Enable Switch - This momentary
switch energizes the proportional controller. It
must be held depressed continuously while
engaging either the lift/drive functions.
3. Warning Alarm Indicator Light - This light glows
and an alarm sounds when an unsafe condition
occurs.
4. BASE/OFF/PLATFORM Select Key Switch -
This three-way selector switch allows the operator
to turn off the power to the aerial platform or to
activate either the base or platform controls.
5. Emergency Stop Button - When depressed, this
red “mushroom-head” push-button switch
disconnects power to the control circuit.
2.2-11 Outrigger Controls
Outrigger Controls - Located on the operator’s
control box, these switches control each outrigger’s
extension and retraction.
Figure 2-9. Outrigger Controls on
Operator’s Control Box
1. Outrigger UP/DOWN Control Toggle Switches
- These switches control the extension and
retraction of each individual outrigger.
2. Enable Push-Button - When depressed and
held, this push-button switch brings power to the
outrigger circuit.
6. LIFT/OFF/DRIVE Select Toggle Switch -
Selecting “OFF” position disconnects power from
both lift and drive circuits. Selecting “LIFT”
position energizes the lift circuit. Selecting
“DRIVE” position energizes the drive circuit.
7. Horn Push-Button - Located on the side of the
operator’s control box, this push-button switch,
when depressed, sounds an automotive-type
horn.
2 1
3
6
7
4
5
1
2