Skyjack 6826El, Руководство по эксплуатации

Страница: 26 / 47

April 2006
SKYJACK, Page 26 SJIII Series E - CONVENTIONALS
Section 2 - Operation Start Operation
8. Push the proportional controller handle forward
until desired height is reached.
9. Return the proportional controller to the neutral
center position to stop. Release the enable trigger
switch.
Warning
To protect against unintended movement of the
aerial platform, push in the emergency stop
button after you have arrived at your desired
location and/or elevation.
Note
If the tilt alarm sounds and the platform does not,
or only partially raises, immediately lower the
platform and ensure that the machine is on a firm
LEVEL surface.
Note
Lowering is not proportional.
6. Return the proportional controller to the neutral
center position to stop. Release the enable trigger
switch.
Warning
To protect against unintended movement of the
aerial platform, push in the emergency stop button
after you have arrived at your desired location or
elevation.
2.5-6 To Lower the Platform using the Operator’s
Control Box
Warning
Do not lower the platform unless the area below is
clear of personnel and obstructions.
1. Ensure the emergency stop button is pulled out.
2. Select “PLATFORM” position with BASE/OFF/
PLATFORM select key switch.
3. Select “LIFT” position with LIFT/OFF/DRIVE
select toggle switch.
4. Activate and hold the enable trigger switch by
squeezing it towards the proportional controller.
5. Pull the proportional controller handle backward
until desired height is reached.