April 2006
SKYJACK, Page 20
SJIII Series E - CONVENTIONALS
Section 2 - Operation
Component Identification
2.2-12 Folding Guardrail System
Folding Guardrail System
- When folded down, the
folding guardrail system reduces the height of the
retracted aerial platform for transporting only.
Figure 2-10. Folding Guardrail System
1.
Guardrail Locking Pin with Lanyard
- To fold
the guardrail system down, remove the locking
pin at each pivot point and lower each guardrail.
To raise the guardrail system, swing up each
guardrail and lock in place with the locking pins
ensuring that the detent ball of each pin is all the
way through and clear of the side of the pivot
brackets (
Figure 2-10
).
The scissor assembly must be fully lowered
before raising or lowering the guardrails.
Warning
Before operating this aerial platform
check the guardrail system for loose or missing
locking pins. The guardrail system must be upright
and all pins must be locked in place.
Death or serious injury could result if the guardrail
system is not upright or properly locked.
Warning
DETENT BALL
CLEAR OF SIDE
OF PIVOT BRACKET
Correct Position of Locking Pin
2.2-13 Lanyard Attachment Ring
Lanyard Attachment Ring
- Use this ring as an at-
tachment point for safety belt/harness tethers. DO NOT
attach belts/harnesses to any other point on the plat-
form. DO NOT use this ring to lift, anchor, secure or
support the platform or any other apparatus or mate-
rial.
Figure 2-11. Lanyard Attachment Ring
Warning
The lanyard attachment ring is used for travel
restraint, within the limits of the platform only.
It is not a fall arresting device!
Use as such could result in death or serious injury.
1
Содержание 6826El
Страница 47: ...MOBILE ELEVATING PLATFORMS www skyjackinc com ...