Skope 400 A, Инструкция по эксплуатации

Страница: 6 / 68

2
2. RECEPTION OF THE MACHINE
Inspect the exterior of the packaging. If it is broken or damaged, complain to the haulier.
To checky whether the machine is damaged, UNPACK IT IN THE PRESENCE OF THE HAULIER and make a record on
the reception document, or on a separate document, of any damage that the machine may have suffered. Since 1
May 1998, it has complied with European regulations on the management
of Packaging and Packaging Waste.
Always record the machine and model number. This number is marked in
three places:
Packaging
There is an external label with the factory number.
Exterior of the machine
On the back, on a label that is identical to the front.
Name plate
Check that the installation kit is complete inside the machine. It is consists of: ¾ gas connection, two filter joints,
anchor bolts and the manual.
CAUTION: THE PACKAGING ITEMS (PLASTIC BAGS, CARDBOARD BOXES AND WOODEN PALLETS) MUST NOT BE
LEFT WITHIN REACH OF CHILDREN AS THEY ARE A POTENTIAL SOURCE OF DANGER
3. INSTALLATION
3.1 CONDITIONS OF THE LOCATION
The machines are designed to function in an ambient temperature of between 5ºC and 43ºC, and with water
input temperatures of between 5ºC and 35ºC.
Below these minimum temperatures, there may be difficulty in removing the cubes. Above the maximum, the life
of the compressor is shortened and production is considerably reduced.
3.2 WATER AND DRAINAGE CONNECTION
Bear in mind the following preliminary considerations on water quality:
Water quality has a significant influence on the quality, hardness and taste of the ice, and on the life of the
condenser in water-condensed machines.
a) Water impurities: larger impurities are retained by the filters which come with each machine. The filters must