Skope 400 A, Инструкция по эксплуатации

Страница: 21 / 68

17
Production
When the machine is working during the production time, the display will appear as follows:
When the detachment has finished the screen will show a progress bar with the time remaining until the end of
the cycle.
It will also show the following text at the bottom of the screen: “Fabr.: -12ºC”, with the temperature indicated by
the SC cycle probe.
As the production time is “tf=tfv+tff” and at the start it is not known how long the “tfv” will last, since it depends
on the “Tfc”, take as a reference: cooling time “tfv” of the last cycle + set production time “tff”.
If the tfv of the last cycle is not known, use a time of 25 minutes (total production time tf=tfv+tff) for the
calculation (for example, in the first cycle of the machine).
Once the cycle has started and, as soon as point 4 on the graph is reached, you will know exactly the time
remaining until the end of the cycle, because "tf" will be defined at that time. Therefore, at this point, the bar will
be recalculated so that it reaches the end just as the cycle has finished.
Cleaning
Only the water pump works. It can be accessed with the machine off, pressing simultaneously the “OK” and
power “I” buttons for 3 seconds.
The display will show:
To end the cleaning cycle, press the power button “I” and the machine will turn off.
Washing