Skope 400 A, Инструкция по эксплуатации

Страница: 56 / 68

52
12.8.14 MINIMUM VARIABLE PRODUCTION TIME
The minimum variable production time will measure the minimum time the machine has to
wait to start production. It is measured in minutes and seconds with a resolution of 1 second.
The value can be changed with “Up/Down”. By pressing “OK”, you can store this parameter
and go to the next one. The value will remain stored even if the machine is disconnected from
the mains.
12.8.15 MAXIMUM MACHINE TIME
The maximum machine time measures the maximum continuous operation time of the
machine without stops.
I
t is measured in hours and minutes with a resolution of 1 minute. It
allows to defrost the machine with a given time.
The value can be changed with “Up/Down”. By pressing “OK”, you can store this parameter
and go to the next one. The value will remain stored even if the machine is disconnected from
the mains.
ATTENTION: FOR INDUSTRIAL USE OF THE MACHINE, IT IS RECOMMENDED TO CHANGE THE
MAXIMUM MACHINE TIME TO 20 MINUTES EVERY 2 DAYS.
max. Freez. t.
60:00 (mm:ss)
min. Freez. t.
02:00 (mm:ss)