Maintenance work
8.2
Cleaning
8.2.1
To be performed by operator
Clean line actuator:
Separate the actuator from the energy supply.
1
Clean dirty parts with a damp cloth.
2
Inspections and readings
8.2.2
To be performed by professional electrician
The inspections and readings must be performed as required by
•
the applicable standards and regulations. The list of the applicable
standards can be found in the appendix.
The inspections must be documented († “Service Log”).
•
Service log
Complete the following entries in the service log:
Name of the executing body (company, department).
•
Names of the staff on duty.
•
Identification of the actuator/system (type, serial number, inven-
•
tory number) and the respective accessories.
Completed inspections and readings.
•
Scope and results of the inspections.
•
Measuring method, measuring device, measuring results for
•
readings.
Overall assessment.
•
Date and signature of the assessing person; personal coding is a
•
viable alternative for IT applications.
Damage due to incorrect cleaning!
Therefore:
Do not use any aggressive cleaning agents. Water used for
•
cleaning including the chemical additives must be pH-neutral.
Liquids must not touch the actuator during the retraction or
•
extension.
Only use additional cleaning materials listed by the
•
manufacturer.
No steam jets or pressure washers may be used for cleaning.
•
Other cleaning agents or cleaning devices may only be utilized
•
with the manufacturer’s approval.
C A U T I O N
32
ООО
"
Индастриал
Партнер
"
Авторизованный
дистрибьютор
SKF
www.skf.indpart.ru
8(495)223-07-69
Техническая
поддержка
:
[email protected], 8(495)223-07-69
