Ensure that the applied force on the fastening bolts is always cen-
2
trically directed on the actuator (
† Fig. 7
).
During installation, be sure that the linear actuator is not
3
impacted in its movement over the entire stroke area.
During installation, be sure that the motor cable is not squeezed,
4
clamped or pulled.
Connect linear actuator to power supply (
5
† Subchapter
Connect
to Power Supply
).
Ensure that none of the supply or control cables can be pinched
6
by the kinematics of the application or by the linear actuator dur-
ing the extension or retraction
Fig. 7
Risk of injury and material damage due to incorrect
installation!
During installation, do not subject the actuator to side-impact
or to turning forces.
W A R N I N G
23
ООО
"
Индастриал
Партнер
"
Авторизованный
дистрибьютор
SKF
www.skf.indpart.ru
8(495)223-07-69
Техническая
поддержка
:
[email protected], 8(495)223-07-69
