Return to the manufacturer
5.3
Proceed as follows for the return transport:
Dismantle the actuator if necessary (
1
†
Chapter
Dismantling
).
Pack the actuator in its original packaging. Follow storage condi-
2
tions (
†
Chapter
Storage
).
Send to manufacturer. The address is listed on
3
page 46
.
Packaging
5.4
For packaging
The individual packaged pieces have been packaged appropriately
according to the expected transport conditions.
The packaging is supposed to protect the individual components
from damage caused by the transport, corrosion and other damage
until they are ready for installation. Therefore, do not destroy the
packaging and only remove the actuator shortly prior to the installa-
tion. Keep packaging for possible return shipment to the manufac-
turer (
† Chapter 5.3
).
If the packaging is to be disposed off, please adhere to the
following:
Environmental damage due to incorrect disposal!
Packaging material consists of valuable raw materials, which,
in many cases, can be recycled.
Therefore:
Dispose of packaging material in an environmentally
•
correct way.
Comply with locally applicable disposal regulations.
•
C A U T I O N
Handling of packaging materials
19
ООО
"
Индастриал
Партнер
"
Авторизованный
дистрибьютор
SKF
www.skf.indpart.ru
8(495)223-07-69
Техническая
поддержка
:
[email protected], 8(495)223-07-69
