Safety equipment
2.5
Integration in an emergency-stop system required (for certain
applications)
The actuator is only intended for installation into an an application
or system. It does not have its own operating control elements and
does not have an independent emergency-stop-function.
Install the actuator so that it is part of an emergency shut-off sys-
tem and can be stopped if necessary.
The emergency shut-off system has to be connected in such a
way that a disruption of the power supply or the reactivation of the
power supply after a power disruption cannot cause a hazardous
situation for persons and objects.
The emergency shut-off systems must always be freely
accessible.
Danger of injury caused by moving components!
Rotating and/or linearly moving components can cause severe
injury.
Therefore:
Do not work on or place any of your body, hands, or arms near
•
moving components.
W A R N I N G
Danger due to malfunctioning safety equipment!
For safe operation, be sure all safety equipment is in good
working order.
Therefore:
Always check functionality of safety equipment according to
•
the maintenance plan.
Never disengage safety equipment.
•
Safety equipment may never be by-passed or modified.
•
W A R N I N G
!
Note!
The processor decides which applications require the
installation of an emergency shut-off system.
9
ООО
"
Индастриал
Партнер
"
Авторизованный
дистрибьютор
SKF
www.skf.indpart.ru
8(495)223-07-69
Техническая
поддержка
:
[email protected], 8(495)223-07-69
