The following chapter describes potential causes for malfunctions
and the work that is necessary to restore operation.
In the event of frequent malfunctions, shorten the maintenance
intervals.
Contact the manufacturer concerning malfunctions which are not
solved by the following suggestions.
Personnel
Unless indicated otherwise, the work described herein to solve
•
malfunctions may be performed by the operator.
Some work may only be carried out by qualified personnel, which
•
is specifically indicated in the description of the individual
malfunction.
Work on the electric system may only be performed by profes-
•
sional electricians.
Electric shock and moving parts hazards
Serious injury or death can be caused by touching live electrical
components and by unexpected movement of the actuator.
Be sure power supply is off and actuator is locked out before
installing.
D A N G E R
Electrical equipment
Danger if restarted without authorization!
When correcting faults, there is danger of the energy supply
being switched on without authorization. This poses a life-
threatening hazard for persons in the danger zone.
Therefore:
Prior to starting work, switch off the system and safeguard it
•
from being switched on again.
D A N G E R
Safeguarding against restart
Malfunctions
9
34
ООО
"
Индастриал
Партнер
"
Авторизованный
дистрибьютор
SKF
www.skf.indpart.ru
8(495)223-07-69
Техническая
поддержка
:
[email protected], 8(495)223-07-69
