Brief description
4.2
This actuator is to be used exclusively for installation into a dynamic
centric-compression or tensile-loaded lift.
The linear actuator consists of a motor part (
3
) and a linear unit
(
5
), connected with each other by a bayonet joint.
The actuator consists of a direct current motor with spur gear
which sets in motion a trapezoidal sliding spindle system with shaft
joint. Via the ball screw mount, the sliding spindle transforms the
rotation of the gear into a linear motion of the actuator (
1
).
The front hinge head (
4
) and the rear hinge head (
7
) transmit the
actuator power to both sides of the application.
Fig. 3
Overview
1
2
3
4
5
7
14
ООО
"
Индастриал
Партнер
"
Авторизованный
дистрибьютор
SKF
www.skf.indpart.ru
8(495)223-07-69
Техническая
поддержка
:
[email protected], 8(495)223-07-69
